TSX-V:W
$0.305
OTCQB: SPRMF
$0.231
Quotes delayed 15 minutes, unless otherwise indicated

TSX-V - W

HIGH-GRADE PAST PRODUCING DISTRICT

• Strategic (W-Rb-Sb) plus precious and base metals (Ag-Cu-Pb-Zn)
• Historic production near 1.0% WO3
• Possibly the only significant Rb source in US

EXPLORATION UPSIDE

• Multiple deposit types including Porphyry, Skarn, and CRD
• Bonanza grade Cu-Ag-Sb (1-4% Cu, 500-1,500 g/t Ag, 0.2-0.5% Sb) at the Antelope mine has not been tested

SIGNIFICANT POTENTIAL

• Tungsten, Rubidium, and Silver-rich tailings/waste dumps require further scoping and metallurgical studies
• Sample grades suggest significant WO3, Rb and Ag potentially present in tails
• Potential to add significant shareholder value via reclamation and processing

Eagle Project

A Past producing High-Grade Tungsten District

The Eagle Project presents a unique opportunity to explore a district containing three past-producing tungsten mines with reported historic grades of 0.6–3.51% WO3¹.

 

The project consists of the past-producing high-grade Tungstonia (W) and Rees/Antelope tungsten (W-Cu-Ag) mines. Operations at these mines were from 1915 to 1942 with intermittent small-scale production occurring until 1956. Tungsten production from these two mines totaled 8,379 units at grades between 0.6%-0.9% WO3 (1)

 

The project is ~36.5 km² in size and located approximately 120 kilometers northeast of the town of Ely, in the Kern Mountains of White Pine County, Nevada. The project covers 9,033 acres consisting of 445 Bureau of Land Management (BLM) unpatented lode mining claims. 

 

Three deposit types are present at Eagle; Porphyry, Skarn, and Carbonate Replacement (CRD) that contain significant or anomalous grades of Tungsten (W) and Rubidium (Rb) plus Cu-Ag-Sb±Au-Pb-Zn-Bi-As across three project focus areas that includes the potential to recover W-Rb-Ag from the legacy Tungstonia Mill Tailings.

2025 Highlights

  • Field reconnaissance and rock chip sampling was conducted which confirmed historic work and provided new data in the Tungstonia area providing a strong foundation for future work programs (August 7),
  • Identified high-grade silver-rich CRD targets on trend with the Tungstonia vein system which strongly suggests the potential for a larger CRD target that could potentially contain significant critical metal concentrations (November 3),
  • Doubled the number of exploration and mining claims at Tungstonia to now cover 7,131 acres (November 25),
  • Identified two new tungsten-silver-rubidium targets of potentially significant scale (December 9) expanding the known mineralized footprint of the Tungstonia system and,
  • Provided encouraging assay results on the tailings at the former Tungstonia mine which support our belief that the legacy Tungstonia tailings can be an important part to fund future development at Eagle (December 18).

(1) Nevada Bureau of Mines and Geology (1988), Bulletin 105 p213-217.

 

Rock chip samples were taken by hand with rock hammer across veins to obtain an approximate 1.5 – to 2-kilogram sample. 2 – 4 centimeter (“cm”) sized rock fragments are preferred; however, 7-10 cm sized fragments are collected when the associated crystal sizes are larger than the nominal 2 – 4 cm preferred size. Rock chip samples by their nature are selected samples and may not represent the underlying mineralization.

 

The scientific and technical information on this page/document has been reviewed and approved by Brett R. Marsh, M.Sc., MBA, CPG, President and CEO of Spartan Metals Corp., a Qualified Person as defined in National Instrument 43-101 — Standards of Disclosure for Mineral Projects. Mr. Marsh is not independent of the Company.

Eagle Technical Report